How Much Does a Toilet Installation Cost?

Toilets are a necessity, but perhaps your old one is due for an upgrade. Newer toilets are more water-efficient and give your bathroom a refreshed look. On average, it costs between $150 and $1,000 to replace a toilet.

A significant portion of the cost of toilet installation is labour. Installing a toilet typically takes only a few hours, and hourly rates depend on local plumbing rates. On average, toilet installation costs between $60 and $130 per hour. The table below shows variations in labour costs due to local hourly rates for plumbing.

City	Average Installation Cost (per hour)
Sydney	$60 – $120
Melbourne	$60 – $120
Brisbane	$50 – $130
Canberra	$60 – $130
Perth	$70 – $130
Adelaide	$60 – $110

*Please note that these prices are just estimates and may vary depending on various factors such as the complexity of the installation, the location, and the plumber’s experience and reputation. It’s always best to get a detailed quote from a licensed plumber before proceeding with any toilet installation work.

There are only a few items that can impact the cost. Toilet prices and the amount of construction are a few. The following explores the elements that can affect the cost of toilet installation.

Brand new or replacement

One of the factors that affect the cost is whether it is a new install or a replacement. There is more labour involved in a new build because all of the plumbing must be installed. A replacement often costs less because the major plumbing is already in place.

Type of toilet

The cost to replace toilet fixtures depends on the type of toilet. There are only a few different types of standard toilets, and the brand can make a difference in price. Some are more labour-intensive to install, such as a wall hung toilet.

The complexity of the project

The complexity of the project will depend on a variety of things. They include whether repair work is needed and if the location of the toilet is moving. The more construction and repair that needs to be done, the more the job will cost.

Location

The location of the toilet within the home can also affect the cost. If the area is difficult to access, it can cost more.

Labour

Labour is a major factor in the cost to install toilet plumbing. A licenced plumber must perform it, and it must meet specific building codes and regulations. A difficult install will increase the labour price.

There are several different types of toilets that will affect toilet replacement cost. Toilet cost depends on the type of toilet that you choose.

Wall-faced

The wall faced toilet has a hidden, and the toilet is flush against the wall surface. This is an attractive option, and you can expect to pay between $1,000 to $1,500.

Close-coupled

A close coupled toilet is the most common type of toilet where the cistern is directly above the back of the system. It is the easiest to install, too. They cost between $250 and $1,200.

Back to wall

A back to wall toilet has a cistern attached to the bathroom and has no pipes visible. This type of toilet installation averages $400 to $1,200.

Wall-hung

A wall hung toilet is similar to a wall-faced one. However, the toilet itself is fixed to the wall. This style gives the bathroom an updated and modern look and can cost between $1,000 and $1,500. 

Composting

A composting toilet is an excellent solution for those who have campers, RVs, tiny homes, or remote cabins. This type of system does not connect to a septic system. Composting toilet cost of installation is usually less than a standard toilet because there is little plumbing involved. Composting toilet price averages at about $900, but they are not legal in all areas.

Incinerating

An incinerating toilet is a clean and efficient way to eliminate waste. This option requires no water, chemicals, or gas. Incinerating toilet prices range between $1,800 to $2,200.

Sometimes, you can save on the cost of installing new toilet fixtures by replacing worn-out parts. The following is a breakdown of the average price for various components.

Cistern

The cost to replace toilet cistern parts depends on the type and size of the cistern. Many toilets come as one unit, and the cistern cannot be replaced separately. If you can replace it, the cost is around $50 to $100.

Fitting

The toilet fitting price for a kit runs between $35 to $100 for the fill valve, shut off valve, bowl flush valve, and flapper. The cost to install new toilet parts is relatively cheap.

Basin

The toilet basin cost is almost as expensive as an entirely new unit. It generally costs around $70 to $120 to replace the toilet basin.

Tank

Toilet tank cost is around $40 to $100 and generally takes about one or two hours. It also depends on whether the internal tank parts require replacement, too.

Bowl

The average toilet bowl price is around $60 to $100, plus labour. Many recommend replacing the entire fixture instead of just the bowl, especially if the unit is older.

Seat

Toilet seat price depends on the type of toilet seat that you buy. The basic toilet seat cost is around $25, but you can spend over $1,000, depending on features and designs.

Pump

The toilet pump cost is about $100 to $400 for a vacuum-assist pump. Not all toilets use pumps.

A cracked toilet cistern is one of the most common problems that homeowners encounter. When this happens, the question that they ask most often is whether they should replace the tank or the whole toilet.

Cost to replace the whole toilet

There are advantages to replacing the whole toilet. A new toilet cost is only a little more than replacing the cistern. This is also the perfect chance to upgrade the look of the bathroom. It costs around $100 to $400 to replace the entire toilet and will cost nearly as much to replace just the cistern. However, there are some exceptions.

Cistern replacement

If you have a standard model, the toilet cistern price can be almost the same cost as a new toilet at around $50 to $100 without labour. For only about a hundred dollars more, you can have a new toilet. However, if you have a specialty toilet, replacing just the cistern might be the right choice. If you have a designer toilet that costs between $1,000 to $6,000, then replacing the cistern might be the most cost-effective choice.

Valve replacement

Toilet flush valve replacement is inexpensive and does not take long. They typically come as a kit that costs between $30 to $100.

Cost to replace a wax seal on a toilet

If your wax seal breaks, then you can have a severe leak. The wax seal itself only costs about $5 to $35, but it can take a couple of hours in labour.

How much does portable toilet hire cost?

Many factors decide the cost of portable toilet units for events. Portable toilet cost differs according to the area. One-stall systems can be rented for $150 a day and a double stall for about $1,500 a day.

Price Estimates for Toilet Cubicle Partitions

Toilet cubicle partitions are necessary for privacy in multiple toilet locations. There are many different styles and options available. They can be made from timber, vinyl, or metal.

How much does it cost to install a toilet partition?

Toilet cubicle partitions prices differ according to location, size, and type of material. They are often custom built to suit, but some companies offer standard packages. Partition prices start at around $250, but additional hardware can add to this cost significantly.

Toilet installation price can vary according to location and the experience of the plumber. You want a plumber who is experienced and has an excellent reputation for quality work.

How to Create an Accurate Estimate

Although most toilet installation jobs are standard, here are few tips to help you get an accurate toilet price estimate. You should have the following information on hand.

• The type of toilet you want and the kind that is already there.
• Is the install on the ground level, basement, or upper floor?
• Has there been a leak that caused damage?
• What is the approximate age of the old toilet?

Licencing and Qualifications

A licensed plumber must perform toilet repair and installation. Here are a few things to consider.

• Is the plumber licensed and insured to work in your area?
• How long has the plumber been in business?
• Can you check any references or talk to someone who has used them?

How to Save Money Hiring a Plumber

Here are some money-saving tips for hiring the right plumber for the job.

• Get at least three estimates, and be sceptical of those that are too low.
• Shop around for the best prices for the toilet that you want.
• Make sure to compare estimates for what is included.

Product	Description	Cost
Mondella Concerto Toilet	A stylish and modern toilet with a soft close seat and dual flush technology	$249
Mondella Toilets	Various toilet models from Mondella, offering both style and functionality	$99 – $349
Fitting Toilet Pan Collar	A PVC connector used to connect the toilet pan to the sewerage drain	$10 – $30
Fowler Dual Flush Mechanism	A replacement part for dual flush toilets, allowing for efficient water usage	$20 – $50
Caroma Urbane Cleanflush	A rimless toilet design for easy cleaning, with a concealed cistern and chrome buttons	$649

*Note: The cost listed for each product is an average price and may vary depending on the retailer and location.

How much does it cost to relocate a toilet?

Relocating a toilet involves moving plumbing and additional construction, making it an expensive option. The cost of relocating a toilet typically ranges between $650 to $850 for each drain line, in addition to the cost of installation and sealing the old hole.

How much does it cost to unclog a toilet?

Unclogging a toilet can be a complex job, and the cost may vary depending on the severity of the clog. Hiring a professional plumber to unclog a toilet can cost anywhere between $60 and $250.

What is the cost of installing a second toilet?

Adding a second toilet to your home will involve installing an additional drain and the new toilet, making it cost approximately $650 to $850 for the extra drain and around $400 for the installation of the new toilet.