Hero image

How much do Fibreglass Pools cost?

$25,000 - $45,000

    How Much Does a Fibreglass Pool Cost?

    A pool creates the perfect sanctuary for escaping the summer sun. A fibreglass pool is an excellent option for those who want a durable pool, but do not want the expense of concrete. Fibreglass pool prices are much lower than concrete pools of the same size and tend to cost between $25,000 to $50,000.

     

    Costs of Fibreglass Pools Across Australia

    Prices vary from area to area, depending on local labour costs, competition and the distance from the shell factory. Here are a few examples of prices for fibreglass pool installation throughout Australia.

    State Average Labour Pool Costs Per Hour
    New South Wales $90
    Victoria $90
    Queensland $90
    Australian Capital Territory $100
    Western Australia $90

    Factors Impacting the Cost of a Fibreglass Pool

    Fibreglass pools cost less than concrete but more than vinyl-lined pools. Costs vary based on several different factors.

    Size and shape – The size and shape of your pool will affect the cost. You could pay as little as $6,000 for a small plunge pool to $25,000 for a larger shell excluding installation costs.

    Location and soil type – The location and soil type will also affect the cost of the pool. Excavation and moving earth cost about $90 per hour. The length of the job depends on the area, depth of the excavation and accessibility of the site. The amount of terracing and levelling needed also affects excavation costs. Prices can range between $80 and $100 per hour. Most pool installations average $2,500 for the project.

    Council requirements – Council requirements can also affect swimming pool installation cost. For instance, Australian Standard AS 1926.1-2012 provides the specifications for pool fencing which state that:

    All pools with a depth of greater than 300mm need fencing

    The fences and gate must be at least 1.2 metres tall or higher

    There must also be no gap at the bottom of the fence greater than 100mm

    Spaces between vertical slats must be no greater than 100mm

    These are the minimum requirements, but some states and localities have more stringent laws. Some states also require permits and inspections that require a fee. Make sure to check your state’s requirements before your project.

    Landscaping and accessories – One of the advantages of a fibreglass shell is that you have many more design possibilities than with concrete. You want to make your pool into your private paradise. Here are some typical prices for landscaping and features to make it your sanctuary. 

    Additional Pool Accessories Average Reported Cost
    Wall climbing pool cleaner $350
    Self-cleaning chlorinator $700
    Poolside paving $40 – $100 per square metre
    Decking $200 – $1,000 per square metre

    Price Estimates for Different Types of Fibreglass Pools

    The price of a fibreglass pool varies according to the type of pool that you install. Most fibreglass pool manufacturers offer a selection of different shells, but if you want something unique, some companies provide custom shells. Here are a few examples of what you might expect.

    Inground – A small inground 2.1 metre X 2.1-metre inground spa costs about $8,000 installed. A 15-metre x 3 metre lap pool costs about $18,000 installed.

    Partially above ground – Sometimes, it is possible to install a pool partially above ground, but this depends on the pool manufacturer and soil conditions. This option is often a custom installation and can range on the high-end of the pool costs. They require panelling and supports for the shell. It’s common to think that this option costs less than excavating, but the requirements are often stricter, and the cost is typically higher.

    Resurfacing – Eventually, the fibreglass surface may need to be resurfaced, as it can become worn over time. Fibreglass pool resurfacing cost is about $5 to $10 per square metre. It generally costs about $400 to $600 for about six hours of labour on the average pool.

    Repairs – Pool repairs are often forgotten about when deciding to install a pool. The good news is that minor damage to fibreglass pool is relatively inexpensive, generally averaging under $300. Plumbing costs can be expensive and range upwards of $1,000.

    Renovations – Over time, the pool surface can become faded and worn. Colour restoration costs around $700.

    Heating – In many parts of Australia, heating is a necessity for a pool. The two most popular types for fibreglass pools are solar and electric. When choosing a heating system for your pool, you need to consider the initial costs and the ongoing costs of operation. Ongoing costs for solar heaters are virtually nonexistent, but they may not do the job if you go through a period that lacks bright, sunny days. Solar systems cost between $1,000 and $5,000. Electric heaters cost about $4,500 to $6,000, but they can be expensive in the long run, depending on fluctuations in electric prices.

    Pool surrounded by grey tiles.

    Pool surrounded by grey tiles. | Source: Cityscapes Pools And Landscapes

    Summary of Different Fibreglass Pool Costs

    Fibreglass-related Pool Costs Average Reported Cost
    Inground fibreglass pools $8,000 – $100,000
    Resurfacing $5 – $10 per square metre
    Repairs $300 – $1,000
    Colour restoration $700
    Solar heating system $1,000 – $5,000
    Electric pool heaters $4,500 – $6,000

    Pros and Cons of a Fibreglass Pool

    A fibreglass pool has advantages and disadvantages. These are a few considerations when looking into getting a fibreglass pool.

    Advantages of Fibreglass Pools Disadvantages of Fibreglass Pools
    Moderate price range Can be challenging to install in some sites
    Many custom designs available Not as durable as concrete pools
    Generally, last about ten years before needing to be resurfaced Can develop holes that need to be repaired

     

    Easy to install in many areas  

    How to Hire a Fibreglass Pool Installer

    Swimming pool prices differ among various installers. It is essential to do your research and ask questions before hiring an installer for your pool. You want to make sure that you get an accurate estimate, and you want a reliable contractor who will do the best job possible. Here are a few things to consider in realizing your pool dreams.

    Tips to Create an Accurate Estimate

    Tip #1 – Get as much information as possible about the type and size of the pool that you want

    Tip #2 – Find out things like how close electricity is to the chosen site and if any plumbing lines need to be moved

    Tip #3 – Research requirements to see what type of fencing and safety precautions you will need

     

    Licencing and Qualifications

    • Here are a few things you need to ask potential contractors.
    • Do you meet the licencing requirements for work in this locality?
    • Are you insured and bonded?
    • What does your quote include?
    • Can you refer me to any previous clients?

     

    How to Save Hiring a Fibreglass Pool Installer

    Tip #1 – Be sure to get more than one estimate

    Tip #2 – Shop around for material costs beforehand

    Tip #3 – Find out how much a fibreglass pool might add to your home value

    Tip #4 – Keep in mind that price has little to do with quality when it comes to pool installers. 

     

    * The cost data is based on Oneflare and third-party sources

     

    Related Fibreglass Pool Cost Guides